Description

4 PC NESTING SHELLS HEMISPHERES

QUICK EASY ASSEMBLY BUILD THE INNER BALL SHELL AS NORMAL THEN APPLY WATER GLASS GLUE OR ADHEISIVE OF CHOICE TO INSIDE OF OUTSIDE HEMI AND PASTE TOGTHER!!!! WOW THAT SIMPLE !!!

ELIMINATES THE NEED FOR PASTING SHELLS – BUILD AND SHOOT WITHIN MINUTES NOT HOURS.

RECOMENDED ADHEISIVE TO USE WATER GLASS OR A PVA ULTIMATE II WOOD GLUE

EACH SHELL CONSISTS OF 4 PCS (2- INNER BALL HALFS) AND (2-OUTSIDE BALL HALFS)

 THE INNER HEMI IS SLIGHTLY SMALLER THAN OUTSIDE HEMI, THEIR FOR THESE ARE CUSTOM MADE AND PRECISE TIGHT FIT

PLEASE SEE THE CHART IN THE PICTURES FOR THE SIZES. THEY ARE ALSO LISTED HERE BELOW.

3″ OUTSIDE COMPLELTED DIA 71 MM OR 2.81″

4″ OUTSIDE COMPLETED DIA 95MM OR  3.74″

5″ outside completes DIA 120mm or 4.724″

6″ OUTSIDE COMPLETED DIA 144MM OR 5.70″

these sizes are exact leaving about an 1/8″ space around the shell circumference = a total of 1/4″ play in the mortar tube. THAT SPACE IS PERFACT GAP FOR SHELLS LIFT CHARGE TO CONTAIN THE PRESSURE CREATED FROM LIFT . EVEN IF THE SHELL IS TITE AND NEEDS A PUSH TO SEAT TO THE BOTTOM OF TUBE THAT IS FINE ALSO –

___________DANGER__________

PASTING OF REGULAR SHELLS MUST BE BUILT TO THE TIGHTEST LEAST PLAY AS POSS 1/8″ OR LESS THAT AMOUNT TO FIT THE TUBE

If u fail to use non nesting shells and do not make shell to proper dia with lots of pasting creating

A GAP that IS 2 BIG & THE SHELL HAS LOTS OF PLAY AROUND CIRCUMFERENCE 1/4″or more = 1/2″ PLAY Total IT WILL EXPELLING THE PRESSURE AROUND THE SIDE OF SHELL LOSING ITS FORCE TO LAUNCH IT OUT AS NEEED FOR PROPER HEIGHT THUS CREATING A LOW BREAK –